TPU Controller Cable Saver / Protector – Gamecube / N64 / PS2 / Wii 3D Printer Model
The file 'TPU Controller Cable Saver / Protector – Gamecube / N64 / PS2 / Wii 3D Printer Model' is (stl) file type, size is 147.7KB.
The file 'TPU Controller Cable Saver / Protector – Gamecube / N64 / PS2 / Wii 3D Printer Model' is (stl) file type, size is 147.7KB.
I needed something to prevent my controller cable from being bent. Since I found nothing suitable, I made my own cable protector for different video game controllers like, Gamecube, N64, PS2 or Wii. It should fit other controller cables as well.
You can use a cable tie to make sure the protector stays in place
There are several versions available for you to print:
IMPORTANT: I made a flat side and you need to rotate the model in your slicer that it is printed on the flat side like shown in the second picture.
PRINT Settings
Material: TPU
Brim: Recommend
Infill: 100%
I produced a lot of prototypes to design the final product and really enjoyed the process till the final product was finished. It would be nice if you could post a make or leave a like or comment.
Thanks
| controler_saver_GC_PS2_XBOX360-soft.stl | 189.3KB | |
| controler_saver_GC_PS2_XBOX360-softest.stl | 74.7KB | |
| controler_saver_GC_PS2_XBOX360-Stiff.stl | 58.9KB | |
| controler_saver_N64_2.stl | 49.1KB | |
| controler_saver_Wii_soft.stl | 72.2KB | |
| controler_saver_Wii_stiff.stl | 57.1KB |
