Holder for a TPMS from Aliexpress. It is mounted on the turn indicator.
The Tuareg's indicator is slippy and cone-shaped so it is required to stick a rubber on the clamp (inside) to mount it straight and secured. Otherwise it can slip during a ride
Mounting instructions:
- put a M5 nut (for wrench 8) in the lower part, secure it using a glue or melted filament
- insert a metal needle, wire or a nail inside a hinge, secure it from falling out by a melted filament
- use a screw M5x30
- stick the TPMS by a double sides stick tape to the holder or use a special screw if your TPMS has it
Printing instructions
- use PET-G as it is stronger and more resistant for weather conditions
- recommended wall thickness is at least 8 wall lines
- infill density 25% with lines pattern
