TP Large Roll Extender 3D Printer Model
The file 'TP Large Roll Extender 3D Printer Model' is (stl) file type, size is 179.6KB.
The file 'TP Large Roll Extender 3D Printer Model' is (stl) file type, size is 179.6KB.
This toilet paper holder is intended to allow for oversized toilet paper rolls on a regular size roller. It fits over both ends of a standard size and snaps into the original holder.
My original holder has a small end of approx 19 mm and a large end of 23 mm. You will need to print 1 large roller, 1 small roller, and 2 screw-in pegs. If you need to scale the rollers larger, make sure you scale the pegs the same amount.
All parts are intended to print without supports, but a plate adhesion is recommended. Print the pegs thread side down. Do not file the pegs. Make sure you insert the pegs from the roller side out. Use a small pillars to fully screw in, but do not over-tighten.
Great gift for a spouse or significant other.
| Lg_Roller.stl | 157.1KB | |
| Post.stl | 113.1KB | |
| Sm_Roller.stl | 177.8KB |
