Toyota Tercel Glove Box Latch Button 3D Printer Model
The file 'Toyota Tercel Glove Box Latch Button 3D Printer Model' is (stl) file type, size is 626.9KB.
The file 'Toyota Tercel Glove Box Latch Button 3D Printer Model' is (stl) file type, size is 626.9KB.
This was modeled based on an original Toyota Tercel 5th gen glove box latch.
Additional parts required:
Metal spring
The actual locking mechanism
Recommended printing settings (Based on OrcaSlicer):
Precise Wall: On
Precise Z Height: Optional
Infill: 100%
Wall loops: 3
Top and Bottom shell layers: 5
Supports: On (Normal; Snug, Rectilinear Grid)
Raft (If printing ABS or ASA): 1 (Optional or use glue)
Recommended Materials (Anything Heat Resistant):
ABS, ASA, PETG, etc.
Tolerances are really tight. You will need a precise printer and a quality filament. In the contrary just sand down the parts until they glide nicely. In the featured pictures I was using neither; so I had to sand them. In addition, they were printed in ASA and I vapor smooth them with acetone.
| Tercel_glovebox_latch_button_L.stl | 275.9KB | |
| Tercel_glovebox_latch_button_R.stl | 276.9KB | |
| Tercel_Glove_Box_Latch_Button_Cap.stl | 1022.8KB |
