The file 'Toyota MR2 SW20 1:28/1:10 RC Body Shell 98mm/102mm/190mm For Touring, Drift, Miniz, Openz Cars 3D Printer Model' is (stl,mix) file type, size is 12.2MB.
Toyota MR2 1:28/1:10 RC body created from a game/render 3D model in Meshmixer
Files are made for 98mm, 102mm and 190mm wheelbase.
The wing has 2 options:
Model was printed on a Prusa Mendel i2
Stickers were printed on my sisters HP sprocket 200 (2x3" inkless printer)
This is my first project using Meshmixer, so there are a few lose polygons around the engine area and the wing a a few small holes. Nothing showed up on the print tho.
| MR2_body_shell.stl | 1.6MB | |
| MR2_body_shell_190mm_1mm_wall.stl | 864.1KB | |
| MR2_body_shell_190mm_2mm_wall.stl | 865.9KB | |
| MR2_body_shell_98mm.stl | 1.6MB | |
| MR2_easy_to_print_wing.stl | 351.8KB | |
| MR2_easy_to_print_wing_190mm.stl | 336.6KB | |
| MR2_easy_to_print_wing_98mm.stl | 352.9KB | |
| MR2_mirror.stl | 14.5KB | |
| MR2_mirror_190mm.stl | 14.5KB | |
| MR2_mirror_98mm.stl | 14.5KB | |
| MR2_unshelled.stl | 514.2KB | |
| MR2_wing.stl | 3.2MB | |
| MR2_wing_190mm.stl | 3.2MB | |
| MR2_wing_98mm.stl | 3.2MB | |
| Toyota_MR2_body_shell.mix | 5.6MB |
