Toyota GT86/FRS/BRZ 1/10 Scale 3D Printer Model
The file 'Toyota GT86/FRS/BRZ 1/10 Scale 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Toyota GT86/FRS/BRZ 1/10 Scale 3D Printer Model' is (stl) file type, size is 1.2MB.
All body panels of the Toyota GT86/ Scion FRS/ Subaru BRZ In 1/10th scale. Just sand the Toyota logo off If you want It to be the Scion or Subaru or I could take It off If needed. I had to use a lot of supports because of how small my current printer is. The rear fenders are very long and i had to stand the whole body panel upright and lay it from one corner to the other on my hotplate to make it fit. I'm in the process of sanding mine down and painting it like my real Frs
UPDATE
This has been a super long project for me and i've also been busy. I recently modeled an exhaust to look like my MXP Comp rs on my real car. I have also added a rear bumper with a socket to adapt the exhaust into it so it will stay straight and have more strength. In the pictures you can tell ive done loads of sanding and also airbrushed it with the specific paint code of my car. I hope to soon have the doors painted and get it mounted on my rc chasis. (This will not be driven fast at all on my rc as it will mainly be to take to car shows and it is pretty heavy) -Thanks!
| Fender_left_front1.stl | 217.5KB | |
| Fender_right_front1.stl | 222.2KB | |
| Front_bumper1.stl | 1.1MB | |
| Front_glass_11.stl | 114.6KB | |
| Front_glass_21.stl | 68.8KB | |
| GT_86_Exhaust.stl | 491.3KB | |
| Headlight_left1.stl | 581.4KB | |
| Headlight_right1.stl | 581.4KB | |
| Hood1.stl | 177.7KB | |
| Left_door1.stl | 175.2KB | |
| Left_door_window_11.stl | 31.7KB | |
| Left_door_window_21.stl | 4.9KB | |
| Left_fender_21.stl | 420.1KB | |
| Left_window_11.stl | 80.5KB | |
| Left_window_21.stl | 24.1KB | |
| Rear_bumper1.stl | 568.1KB | |
| Rear_bumper_with_exhaust_attatchment.stl | 142.4KB | |
| Rear_glass_11.stl | 81.7KB | |
| Rear_glass_21.stl | 53.5KB | |
| Rear_lights_left1.stl | 150.2KB | |
| Rear_lights_right1.stl | 152.2KB | |
| Right_door1.stl | 179.0KB | |
| Right_door_window_11.stl | 31.8KB | |
| Right_door_window_21.stl | 4.9KB | |
| Right_window_11.stl | 80.5KB | |
| Right_window_21.stl | 24.2KB | |
| Right_window_21_1.stl | 24.2KB | |
| Rignt_fender_21.stl | 421.1KB | |
| Roof1.stl | 168.1KB | |
| Trunk1.stl | 701.0KB |
