Toyota Celica Brake Fluid Reservoir Cap 3D Printer Model
The file 'Toyota Celica Brake Fluid Reservoir Cap 3D Printer Model' is (stl) file type, size is 379.1KB.
The file 'Toyota Celica Brake Fluid Reservoir Cap 3D Printer Model' is (stl) file type, size is 379.1KB.
These are the two caps for the brake fluid reservoir for a 1977 Toyota Celica. Probably they will fit other years and models, too.
Dimensions (outer diameter of the reservoirs)
Big cap: approx. 63.5 mm (2,5 in)
Small cap: approx. 49.6 mm (1,95 in)
Printed with ABS because its compatible with the brake fluid.
Please give me Feedback if they fit good, too tight or too loose.
I didn´t do a long-term test yet so use this on your own risk!
| brake_fluid_reservoir_cap_big.stl | 261.8KB | |
| brake_fluid_reservoir_cap_big_v2.stl | 344.9KB | |
| brake_fluid_reservoir_cap_small.stl | 270.9KB | |
| brake_fluid_reservoir_cap_small_v2.stl | 366.2KB |
