Toyota 4mm Rod Clips 3D Printer Model
The file 'Toyota 4mm Rod Clips 3D Printer Model' is (stl) file type, size is 189.6KB.
The file 'Toyota 4mm Rod Clips 3D Printer Model' is (stl) file type, size is 189.6KB.
Replacement rod clips for neighbors broken set on a Tacoma tailgate.
These are used in doors and under the hood as well.
Warning, these are deliberately a little oversized. "Properly" dimensioned parts were a bit thin on the actual snap in so these are larger. They may be too big in some spots, so might need trimming or more force (Bigger Hammer) to make work.
Sized at 4.05mm for 4mm rod, but might need cleanup with a drill bit from printing.
Yes, Toyota does make left and right handed versions. Seems like it wouldn't really matter in most cases, but I can see not wanting the thrust of movement to go against the open side of the rod holding bit of the clip.
Printed in ABS on Rostock. Preset in a group of 4 (and there are 4 in a tailgate). Printing singles on such a small part was messy as there was not enough time to layers to cool between passes.
| LR-Toyota-4mm-Rod-Clip-STD.stl | 738.8KB |
