Many Thanks to "EricThePoolBoy" For Sharing this Engine,
Eric must of put hundreds of hour into replicating this engine in the 3d software
it is among the best I’ve seen and by sharing his work it gives everyone a chance to build one of the best projects available for 3d printing,
This is an Expansion Pack for his "Toyota 22RE Engine" to start adding more detail to the Exterior.
Updated Part-= Starter Motor=-; - http://www.thingiverse.com/thing:2233507
Parts are-
(1) Distributor
(2) Air Conditioning Unit
(3) Alternator with Outlet System for Radiator Hose and Radiator Hose
(4) New Throttle Cable Mount System
(5) Oil Bell
(6) New Oil Filter
(7) Manifold Extras- Sensor Plugs and Inspection Cap for the Manifold
(8) Gasket Kit
(9) Starter Motor – "See Updated Part"
There are Building Notes and Pictures with the Download Files and i have include the SketchUp files so you can Modify them to suit your needs,
I assume you have some mechanical experience if your Building this Engine,,,
All Parts are error free and in there Printing Position,
This Engine of Eric's has unlimited potential for added Exterior detail and I will be adding extra parts to this Expansion Pack for many years to come,,, I had to stop working on this engine until I get some more free time,
So this is the “Expansion Pack” so far- there are, 37 STL Files
The Photos of my Engine is Printed in PLA and Paint Free,,,
-=Mindless=-
| AC_AirConditioning_Parts.skp | 2.2MB | |
| AC_AirConditionUnit.pdf | 117.9KB | |
| AC_IdlerPulley_Bracket.stl | 205.0KB | |
| AC_IdlerPulley_Spacer.stl | 63.5KB | |
| AC_MainCompressor.stl | 2.0MB | |
| AC_MainCompressorBracket.stl | 273.5KB | |
| AC_MainCompressorHalfBracket.stl | 173.0KB | |
| AC_MainCompressorPulley.stl | 1.8MB | |
| AC_Mock_Bearing.stl | 48.6KB | |
| AC__FakeBoltHeads.stl | 29.4KB | |
| AC__Idler_Pulley.stl | 292.6KB | |
| AN_Alternator.skp | 1006.0KB | |
| AN_AlternatorBack.stl | 515.6KB | |
| AN_AlternatorFront.stl | 552.5KB | |
| AN_AlternatorMiddle.stl | 313.1KB | |
| AN_AlternatorPulley.stl | 293.1KB | |
| AN_AlternatorRadiatorMountingSystem.stl | 450.3KB | |
| AN_Alternator_Part.pdf | 119.6KB | |
| AN_Bearing_Mock.stl | 48.7KB | |
| AN_RadiatorHose.stl | 898.3KB | |
| CC_Carberator_Cable_Link.skp | 544.8KB | |
| CC_InnerRing.stl | 482.7KB | |
| CC_OuterRing.stl | 485.3KB | |
| CC_Retainer_Collar.stl | 86.1KB | |
| CC_Spacer.stl | 69.1KB | |
| CC_Throttle_Link.pdf | 27.8KB | |
| DS_Diaphram.stl | 438.0KB | |
| DS_Diaphram_Needs_M3_Bolt.stl | 441.7KB | |
| DS_Distributor_Parts.pdf | 116.2KB | |
| DS_Distrubtor_Body.stl | 423.1KB | |
| DS_Distrubtor_Cap.stl | 512.8KB | |
| DS_Distrubtor_Parts.skp | 904.9KB | |
| GS_EngineHeadGasket.stl | 1.4MB | |
| GS_Gaskets.pdf | 9.0KB | |
| GS_Gaskets.skp | 1.2MB | |
| GS_IntakeManifoldHeadGasket.stl | 1.1MB | |
| GS_IntakeManifoldLowerToUpperGasket.stl | 594.3KB | |
| GS_ManifoldCapGasket.stl | 104.6KB | |
| GS_OilPanGasket.stl | 803.8KB | |
| GS_ThrottleBodyGasket.stl | 293.7KB | |
| GS_ValveCoverGasket.stl | 420.5KB | |
| MF_InspectionCap.stl | 157.9KB | |
| MF_InspectionCapGasket.stl | 102.1KB | |
| MF_Manifold_Extras.pdf | 29.6KB | |
| MF_SensorPlugShort.stl | 38.2KB | |
| MF_SensorPlugTall.stl | 38.2KB | |
| OB_OilBellMountBracket.stl | 240.8KB | |
| OB_Oil_Bell.skp | 498.7KB | |
| OB_Oil_Bell_Base.stl | 299.7KB | |
| OB_Oil_Bell_Middle.stl | 195.4KB | |
| OB_Oil_Bell_Top.stl | 126.3KB | |
| OF_OilBellMountGasket.stl | 123.1KB | |
| OF_OilFilterBottomCap.stl | 99.6KB | |
| OF_OilFilterComplete.stl | 594.1KB | |
| OF_OilFilterMiddleBody.stl | 414.5KB | |
| OF_OilFilterTopCap.stl | 135.2KB | |
| OF_Oil_Filter.pdf | 30.9KB | |
| SM_StarterMotor.skp | 957.1KB | |
| SM_StarterMotorMount.stl | 827.9KB | |
| SM_Starter_Motor_Mount.pdf | 103.7KB |
