Toy Truck Base 3D Printer Model
The file 'Toy Truck Base 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Toy Truck Base 3D Printer Model' is (stl) file type, size is 2.5MB.
Fully printable - no support - no glue - single color 3D printer
This is a truck base/platform, remixes for it are available for sale on https://www.cgtrader.com/sasha19md
Only the truck base/platform is contained in this thing, the tank/mixer/fire truck parts are not included!
Example assemble video tutorials here:
https://youtu.be/EwvFrpBn-Vw
https://youtu.be/vKf4fwXmXI4
https://youtu.be/RoyjeXNYWdg
https://youtu.be/0nlt57LlyOc
https://youtu.be/TJCMTOk385A
The tolerance for pieces that need to fit tightly is 0.1mm, for pieces that need to allow movement (like screws and axles) 0.3mm or more.
Printing list: Nb. STL file name rezolution support colour (my make)
1x axle_back.stl 0.16mm no gray1x axle_front.stl 0.16mm no gray1x backhead_07.stl 0.16mm no black-orange0x back_light.stl 0.16mm no2x back_light_with_flat_cut.stl 0.16mm no orange1x back_light_with_flat_cut.stl 0.16mm no red1x back_light_with_flat_cut.stl 0.16mm no white1x base_semitruck_short_left.stl 0.16mm no gray1x base_semitruck_short_right.stl 0.16mm no gray1x cabin_cap.stl 0.16mm no blue1x cabin_with_support.stl 0.16mm no orange0x cabin_your_own_support.stl 0.16mm yes2x cap_double_rim.stl 0.16mm no gray2x cap_single_rim.stl 0.16mm no gray1x connector_simple_wheel_house.stl 0.16mm no orange1x exhaust.stl 0.16mm no black1x front_grill_07.stl 0.16mm no orange-black-orange1x front_lights.stl 0.12mm no orange-white1x interieur.stl 0.16mm no gray1x interieur_base.stl 0.16mm no red2x rim_double.stl 0.16mm no white2x rim_single.stl 0.16mm no white1x screw_gear_knob.stl 0.16mm no black14x screw_l6mm.stl 0.16mm no blue15x screw_l9mm.stl 0.16mm no black4x screw_l13mm.stl 0.16mm no orange0x sleeping_screw_l9mm.stl 0.16mm no0x sleeping_screw_l13mm.stl 0.16mm no1x steering_wheel.stl 0.16mm no black4x tire_outter_cut.stl 0.16mm no black(TPU)2x tire_simple.stl 0.16mm no black(TPU)1x wheel_house_front_left.stl 0.16mm no gray1x wheel_house_front_right.stl 0.16mm no gray1x wheel_house_simple_left.stl 0.16mm no gray1x wheel_house_simple_right.stl 0.16mm no grayObservations:
all objects already have the intended print direction in the STL files!if you don't like the built in supports for the cabin, then you can find only the cabin in cabin_your_own_support.stlmost of the parts were printed with PLA. only the tires and the mirrors were printed from TPU (flexible material)screws... there are also sleeping screws STLs included, these are printed on the side which makes them a lot stronger the drawback is that these don't close the holes completely... So use as many sleeping screws as you can if the toy is going to be played with, and only normal/round ones otherwiseFire truck based on it in work...
| axle_back.stl | 292.1KB | |
| axle_front.stl | 298.3KB | |
| backhead_07.stl | 145.7KB | |
| back_light.stl | 256.0KB | |
| back_light_with_flat_cut.stl | 211.4KB | |
| base_semitruck_short_left.stl | 361.3KB | |
| base_semitruck_short_right.stl | 363.1KB | |
| cabin_cap.stl | 54.5KB | |
| cabin_with_support_enforced.stl | 389.6KB | |
| cabin_your_own_support.stl | 350.5KB | |
| cap_double_rim.stl | 223.2KB | |
| cap_single_rim.stl | 318.7KB | |
| connector_simple_wheel_house.stl | 233.0KB | |
| exhaust.stl | 47.8KB | |
| front_grill_07.stl | 230.3KB | |
| front_lights.stl | 7.1KB | |
| interieur.stl | 490.7KB | |
| interieur_base.stl | 130.2KB | |
| rim_double.stl | 252.0KB | |
| rim_single.stl | 243.0KB | |
| screw_gear_knob.stl | 329.6KB | |
| screw_l13mm.stl | 202.5KB | |
| screw_l6mm.stl | 142.7KB | |
| screw_l9mm.stl | 201.3KB | |
| sleeping_screw_l13mm.stl | 243.3KB | |
| sleeping_screw_l9mm.stl | 175.8KB | |
| steering_wheel.stl | 444.0KB | |
| tire_outter_cut.stl | 164.7KB | |
| tire_simple.stl | 102.0KB | |
| wheel_house_front_left.stl | 42.6KB | |
| wheel_house_front_right.stl | 42.6KB | |
| wheel_house_simple_left.stl | 30.9KB | |
| wheel_house_simple_right.stl | 30.9KB |
