Toy Train With Surprise Egg 3D Printer Model
The file 'Toy Train With Surprise Egg 3D Printer Model' is (zip,stl) file type, size is 1.6 MB.
The file 'Toy Train With Surprise Egg 3D Printer Model' is (zip,stl) file type, size is 1.6 MB.
This is a Surprise Egg with a Toy Train inside. You can print the train on its own if that's what you want. Your printer should have good tolerances.
The train should be printed on its side, with the window and wheels on the build plate. Add supports on the build plate for the smokestack. The wheels are print in place.
The egg is printed upright and has a print in place hinge. No supports needed, the inside might need slight cleaning up, but it should look just fine. I added two versions of the egg that have different tolerances in case your printer has trouble. Once printed, use a scraper that is used to remove parts from the build plate or use something thin and pry open the middle of the egg. Once the middle is open and a little leverage is added, the lock should free itself and the egg should be openable. Be wary of using excessive force to open the egg.
I printed everything on my CR 6-SE.
| Toy_Train_Surprise_Egg.zip |
| Train.stl |
