Toy Train BNSF Locomotive BRIO / IKEA Compatible 3D Printer Model
The file 'Toy Train BNSF Locomotive BRIO / IKEA Compatible 3D Printer Model' is (3mf,stl) file type, size is 604.6KB.
The file 'Toy Train BNSF Locomotive BRIO / IKEA Compatible 3D Printer Model' is (3mf,stl) file type, size is 604.6KB.
BNSF diesel locomotive toy train (BRIO / IKEA compatible)
You will need the following screws to put everything together.
14x ISO 14585 (DIN7981) 2.9mm x 13mm (https://amzn.to/3WgKty1)
2x ISO 14585 (DIN7981) 2.9mm x 19mm (https://amzn.to/4dcUVgP)
I may earn a commission on qualifying purchases (at no extra cost to you)
Add ring magnets on each side of the train. Use 2x ISO 14585 (DIN7981) 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm. (https://amzn.to/3YdC6G4)
If you want the same colors add 2 filament color changes at 2.80mm (Layer 24) and 4.80mm (Layer 42) and don't forget to add the support enforcer in Prusa Slicer.
You will need to add supports for the following parts:
belly.stl (normal supports for counterbored holes)
bnsf_train_body.stl (2x cylindrical support enforcer for counterbored holes)
roof.stl (1x box support enforcer for the roof at the back)
Prusament Galaxy Black PLA
Prusa Yellow PLA
Prusa Orange PLA
Prusa Silver PLA
If you enjoy these models and want to support me, check out my other toy trains with wagons, here. Thank you!:
https://cults3d.com/en/design-collections/technerd/lovely-toy-trains
| belly.3mf | 18.4KB | |
| belly.stl | 413.5KB | |
| bnsf_train_body.3mf | 132.9KB | |
| bnsf_train_body.stl | 2.6MB | |
| roof.3mf | 23.0KB | |
| roof.stl | 503.6KB | |
| spacer.3mf | 10.6KB | |
| spacer.stl | 178.2KB | |
| wheel.stl | 716.0KB | |
| wheel_pivot_v2.stl | 1.0MB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
