Toy Catapult / Mechanical / Spring Loaded / Adjustable Angle 3D Printer Model
The file 'Toy Catapult / Mechanical / Spring Loaded / Adjustable Angle 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'Toy Catapult / Mechanical / Spring Loaded / Adjustable Angle 3D Printer Model' is (stl) file type, size is 1.4MB.
WARNING: IT PACKS A SERIOUS PUNCH!
Ladies and Genlemen....I give to you the "Hurley 2000" :D
After my first print, I have revisioned the side panels to include guide rails for the gears, since otherwise they would skip when being wound up.
Also the ratchet pawl was initially orientated the wrong way around and also not easily accesible.
Now all should be fine. The size of certain parts imposes the use of rafts, especially those that are inserted, to avoid tolerance issues because of "elephant foot".
Some post-processing may still be required required for assembly.
Except for the guiderails which should be glued into place, all other parts snap into place.
Please post your make, and I would be grateful for any and all suggestions for improvement!
| Bracket_1.stl | 35.8KB | |
| Bracket_2_rev1.stl | 25.4KB | |
| Catapult_Arm.stl | 581.4KB | |
| Crank.stl | 224.3KB | |
| Crank_Handle.stl | 654.7KB | |
| Guide_Rail_1_rev1.stl | 29.6KB | |
| Guide_Rail_2_rev1.stl | 18.8KB | |
| Ratchet_Carrier_rev1.stl | 107.6KB | |
| Ratchet_Pawl_rev1.stl | 41.8KB | |
| Safety_Ring_Big_Catapult_Arm.stl | 43.1KB | |
| Safety_Ring_Catapult_Arm.stl | 37.9KB | |
| Safety_Ring_Crank.stl | 37.6KB | |
| Safety_Ring_Ratchet.stl | 37.1KB | |
| Safety_Ring_Torque_Transfer.stl | 38.3KB | |
| Safety_Ring_Trigger.stl | 36.9KB | |
| Shaft_Catapult_Arm.stl | 122.5KB | |
| Shaft_Torque_Transfer.stl | 78.8KB | |
| Side_Panel_1_rev1.stl | 236.5KB | |
| Side_Panel_2_rev1.stl | 461.3KB | |
| Spur_Gear_small.stl | 164.7KB | |
| Spur_Gear_Spring_1.stl | 367.3KB | |
| Spur_Gear_Spring_2.stl | 367.3KB | |
| Spur_Gear_Trigger.stl | 176.0KB | |
| Stopper.stl | 146.1KB | |
| Trigger_Handle.stl | 243.9KB | |
| Trigger_Mechanism.stl | 63.2KB |
