Toy car model with 3d printer
https://youtu.be/NAgMxgh72fk
The chassis is simple in design and very versatile.
It is based on the WPL B series models.
The distance between the axles of the vehicle is 20 cm
The suspension is sprung and I used two different designs to check both.
Rear - https://www.thingiverse.com/thing:3353725
Front - https://www.thingiverse.com/thing:4694488
https://www.thingiverse.com/thing:2923284
https://www.thingiverse.com/thing:2923271
I designed the interior of the vehicle using several ready-made stl files.
https://www.thingiverse.com/thing:4462972
https://www.thingiverse.com/thing:3421926
I used the bodywork from the finished project by Gamebox13, after modifying only
one front piece to fit the frame.
https://www.thingiverse.com/thing:2875250
https://cults3d.com/en/3d-model/various/chevrolet-blazer-k5-rc-model-with-wpl-axles
| K5_SiJat_Body_1_V_1.8.stl | 68.1KB | |
| K5_SiJat_Dashboard_V_1.8.stl | 1.0MB | |
| K5_SiJat_Front_Bumper_V_1.8.stl | 62.9KB | |
| K5_SiJat_Rear_Bumper_V_1.8.stl | 279.4KB | |
| K5_SiJat_Vehicle_interior_front_V_1.8.stl | 15.4KB | |
| K5_SiJat_Vehicle_interior_rear_V_1.8.stl | 32.3KB | |
| K5_SiJat_Vehicle_interior_sofa_V_1.8.stl | 1.1MB | |
| ServoTray_SiJat_new_truck_V_1.1.stl | 154.7KB | |
| SiJat_WPL_Single_Beam_V_1.3.stl | 354.4KB | |
| WPL_SiJat_B-frame_two_axis_V_1.0.stl | 32.3KB |
