Town Hall US (z-scale) 3D Printer Model
The file 'Town Hall US (z-scale) 3D Printer Model' is (stl) file type, size is 55.25 KB.
The file 'Town Hall US (z-scale) 3D Printer Model' is (stl) file type, size is 55.25 KB.
Town hall US (z-scale)
Z-scale model of a fictional town hall in some small town USA.
Assembling:
Paint in the colors you like.
Use transparent foil, cut to fit and glued on the inside of the (already painted) wall elements, as glass in the windows. Be careful not to place the foils in areas where the walls connect!
I use 0,5mm transparent foil, clear or or slightly opaque, availably at stationary shops.
Alternatively you can "upcycle" plastic packaging material from your groceries.
Assemble the parts as seen in the picture.
Printing:
Print the wall elements flat on the printing bed to allow the details printed without/few supports, base plate and roof with the lower side in the printing bed.
For n-scale use a scaling factor of 1,38 in your printer software.
| t010a_base.stl |
| t010b_front_left.stl |
| t010c_front_middle.stl |
| t010d_front_right.stl |
| t010e_rear.stl |
| t010f_left.stl |
| t010g_right.stl |
| t010h_roof_left.stl |
| t010i_roof_middle.stl |
| t010j_roof_right.stl |
| t010k_wall_for_stairs.stl |
