Tower / Roll Bar Speaker Can 6.5 3D Printer Model
The file 'Tower / Roll Bar Speaker Can 6.5 3D Printer Model' is (123dx,stl) file type, size is 11.2MB.
The file 'Tower / Roll Bar Speaker Can 6.5 3D Printer Model' is (123dx,stl) file type, size is 11.2MB.
Wanted to design my own speaker enclosures for my boat so this is what i came up with. They will fit most 6 1/2 and 6 3/4 speaker. The inter hole size 5.5" and outer size is 6.8" the total height of the can is 7.45"
The mount is a separate piece that Im going to mess around with and make a couple different versions. The first one I did fits 2" 3/8 tubing. I used two 1/4-20 allen head screws that are 2" long to go though the top, then a 1/4-20 lock nut is press fitted in to the bottom mount.
Sizes
2"3/8
2" 1/4 (2.25")
2"
1" 3/4 (1.75")
Print the top mount at 50%+ INFILL
The mount is secured to the can with 3/8 bolt and nut
If your interested in printing the mounts but need them for a different tube size please let me know and i can change the mounts and upload them
| 1.75_Boat_Speaker_Mount_Forward_Bottom.123dx | 356.3KB | |
| 1.75_Boat_Speaker_Mount_Forward_Bottom.stl | 2.4MB | |
| 1.75_Boat_Speaker_Mount_Forward_top.123dx | 237.5KB | |
| 1.75_Boat_Speaker_Mount_Forward_top.stl | 1.7MB | |
| 2.25_Boat_Speaker_Mount_Forward_bottom.stl | 2.4MB | |
| 2.25_Boat_Speaker_Mount_Forward_Top.stl | 1.8MB | |
| 2_Boat_Speaker_Mount_Forward_Bottom.123dx | 359.2KB | |
| 2_Boat_Speaker_Mount_Forward_Bottom.stl | 2.4MB | |
| 2_Boat_Speaker_Mount_Forward_Top.123dx | 200.4KB | |
| 2_Boat_Speaker_Mount_Forward_Top.stl | 1.8MB | |
| 6.5_Speaker_Can.stl | 9.6MB | |
| Speaker_Mount_2-3.8_Bottom.stl | 2.5MB | |
| Speaker_Mount_2-3.8_Top.stl | 1.9MB |
