Towel Rack 3D Printer Model
The file 'Towel Rack 3D Printer Model' is (f3d,stl) file type, size is 1.0MB.
The file 'Towel Rack 3D Printer Model' is (f3d,stl) file type, size is 1.0MB.
Rack for small towels or other things that will hang on a bar.
Designed for a bar of 15mm, center of the bar is 40mm from the wall.
There is a small ridge on one side so the bar doesn't come out on the other side.
There is a small hole for a locking screw, therefor there is a left and a right design file.
I also included a design file without the locking hole, this can be used for both left and right side then.
Mounting holes (56mm apart), use 3.5mm screws.
Locking hole, use 3mm screw.
Included f3d design file for modification.
| TowelRack.f3d | 154.4KB | |
| TowelRack_LeftSideLockingHole.stl | 873.6KB | |
| TowelRack_NoLockingHole.stl | 852.2KB | |
| TowelRack_RightSideLockingHole.stl | 873.2KB |
