Towel Hanger (Fusion360) 3D Printer Model
The file 'Towel Hanger (Fusion360) 3D Printer Model' is (stl,f3d) file type, size is 132.0KB.
The file 'Towel Hanger (Fusion360) 3D Printer Model' is (stl,f3d) file type, size is 132.0KB.
About this remix, first thank you to SijmenSchoon for sharing the original towel hanger. I love it as it does not need two-sided tape nor screws.
I had to scale up the original model (from 16,4mm to 19,1mm) to fit into my kitchen door. As a result the front plate became a bit thicker, thus I decided to create a Fusion360 model with parameters to enable control of all measurements. Parameters are documented in English.
As a result the front plate is now thinner and also the front triangle shaped opening is 5mm longer enabling the hanger to bite better into a towel. The included .stl file has a door opening of 19,1mm. You can scale this model with your slicing software , if you need to adjust - or use Fusion360 to control all dimensions.
Easy to print and does well what it is designed to do.
| towel-hanger.stl | 21.2KB | |
| Towel_hanger_v6.f3d | 129.8KB |
