2nd example with the use of TULAS.
The flexible loop connection is made with a few cm's of TPU filament.
V2 has more grip.
For more info on TULAS, how to connect the filament and how to use it with your own models:
TULAS: the universal hanging/strapping system
NOTE: As a TPU filament I tested with Ninjatek Ninjaflex which has a hardness of 85A. If you use TPU with a higher hardness (e.g. 95A) you cannot pull such tight knots and the chambers for the knots may be too small. It is then best to scale up the model by ± 15%.
| TULAS_Towel_Loop_Clamp.stl | 88.8KB | |
| TULAS_Towel_Loop_Clamp_V2.stl | 177.0KB |
![Wrist Bracelet Parametric [Fusion 360] 3D Printer Model](https://cdn.3axis.co/assets/5f/19/88/90/5f198890-1c7f-48e7-bb63-10de90fb1197/images/87a30da7-dce8-4ce0-8536-5bb6aeefd5a8_thumb.jpg)
