This is a touchscreen mount I designed for my Wanhao Duplicator I3 to use an old Samsung Galaxy S3 as a touch screen for Repetier. It also doubles as a webcam with the "IP webcam" app
Required printed parts
Your choice of 8mm( 5/16") or 10mm (3/8") bracket 1 and bracket 2
Swivel
Meshmixed generic flange to thingiverse supplied hard case of your choice or the provided Samsung Galaxy S3 case
Optional printed part
Pin - Not a required part but it does lock the swivel into the bracket and helps clean up USB cable
Non printed parts
(2) M3-05 x 16mm long socket head cap screws
(5) M3-0.5 x 12mm long socket head cap screws
(7) M3-0.5 nuts
| TSM_-_Generic_mount_flange.STL | 68.9KB | |
| TSM_10MM-_59_degree_rod_mount_-_bracket_2.STL | 261.5KB | |
| TSM_10MM_-59_degree_rod_mount_Bracket_1.STL | 668.9KB | |
| TSM_8MM-_59_degree_rod_mount_Bracket_1.STL | 680.3KB | |
| TSM_8MM_-_59_degree_rod_mount_-_Bracket_2.STL | 269.4KB | |
| TSM_Pin.STL | 1.1MB | |
| TSM_S3_case_mount.STL | 2.9MB | |
| TSM_Swivel_flange.STL | 962.2KB |
