Torture Tower (3D Printer Test) For .100 Mm 3D Printer Model
The file 'Torture Tower (3D Printer Test) For .100 Mm 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Torture Tower (3D Printer Test) For .100 Mm 3D Printer Model' is (stl) file type, size is 1.3MB.
12.6.2016 Added V2 (improved footprint); As seen in the photos.
The wrong one initially got uploaded.
This ugly little tower is for testing:
Temperatures, Nozzle sizes, Retraction, Speed, etc. for various filaments.
You may never print it perfectly, but make a note of the settings you used for your BEST prints, and share ("I made this") with your Printer Model (and settings, please!).
Just a note, Your slicing software version needs to be working properly. Upgrade or try different versions if it cannot render proper printable model.
For any discussions related to test printing this tower,
please adhere to ONLY these settings:
.100mm only
25% Infill
No Support
No Rafts
No Brim
FYI: PLA must use cooling, PETG cooling is recommended, and ABS... maybe!
| TortureTower_by_Hustle_V2_improved_base.stl | 3.0MB |
