Torsen Differential 3D Printer Model
The file 'Torsen Differential 3D Printer Model' is (stl) file type, size is 3.1MB.
The file 'Torsen Differential 3D Printer Model' is (stl) file type, size is 3.1MB.
you can find a video about this here: https://youtu.be/ykYnqIS2Kdo
no extra parts are needed but due to tolerences you may have to sand a bit to get everything to turn freely
| Axel_Clip_x_2.stl | 8.5KB | |
| Base_Plate.stl | 88.6KB | |
| Carrier_x_2.stl | 150.4KB | |
| Clip_x_6.stl | 18.6KB | |
| End_Plates_x_2.stl | 86.6KB | |
| Handle.stl | 333.4KB | |
| Handle_Axel.stl | 73.0KB | |
| Handle_Clip.stl | 52.4KB | |
| Large_Bevel_Gear.stl | 164.9KB | |
| Main_Gear_x_6.stl | 434.0KB | |
| Pin_x_6.stl | 50.7KB | |
| Small_Bevel.stl | 8.1MB | |
| Spacer.stl | 25.1KB | |
| Sun_Gear_x_2.stl | 231.6KB | |
| Top_Gear_x_6.stl | 82.4KB |
