Toroidal Propeller Launcher (snap-fit Model) 3D Printer Model Free Download

Description Files (12)

Summary

We headed for the sandy beach. My daughter enjoyed playing with it.
To make the propeller fly higher and farther, it has a design that combines two gears.
The gears rotate smoothly without using lubricant. It is a snap-fit model that can be assembled without tools.

● About printing

All parts can be printed without support.

We recommend printing with PETG or ABS filament.
It also works with PLA, but it may break if you pull the rod hard.
The printed parts in the image were made using PETG and ABS filaments. The infill is 30%, the nozzle is 0.4mm, and the layer height is 0.2mm.

The combination of Propeller_90mm.STL and gaer_rod_20mm.STL is optimal for playing indoors, while the combination of Propeller_150mm.STL and gaer_rod_25mm.STL is optimal for playing outdoors.

● About assembly

(1) Insert long_axle.STL into handle.STL and small_gear.STL.
Please be careful about the direction of the axle.

(2) Attach gear_cover_bottom.STL to the handle.

(3) Then insert large_gear.STL onto the axle.

(4) Insert short_axle.STL into gear_cover_top.STL and small_gear.STL.

(5) Please insert the two finished parts.

(7) Insert the axle_clip.STL sideways into three places on the shaft to secure it and you’re done.

(8) All you have to do is attach the propeller and pull the rod strongly. Please enjoy!

If you like my work, I would be very grateful if you could leave a tip. The tips will be used as funds to create new model data.

axle_clip.STL	62.2KB
gear_cover_bottom.STL	497.2KB
gear_cover_top.STL	516.3KB
gear_rod_20mm.STL	107.3KB
gear_rod_25mm.STL	130.4KB
handle.STL	446.6KB
large_gear.STL	505.4KB
long_axle.STL	38.8KB
Propeller_150mm.STL	314.1KB
Propeller_90mm.STL	355.8KB
short_axle.STL	26.4KB
small_gear.STL	473.5KB

Toroidal Propeller Launcher (snap-fit Model) 3D Printer Model

Summary

Tags

You might also like