These are for pegboards with 7mm holes at 1in squares.
| Channel_Lock_pliers2.stl | 430.7KB | |
| Glue_Stick.stl | 311.5KB | |
| Irwin_Stripper.stl | 198.0KB | |
| peg_2.stl | 174.1KB | |
| peg_3.stl | 238.9KB | |
| Peg_4.stl | 333.8KB | |
| Rubber_Mallet_Holder.stl | 406.1KB | |
| ScrewDrivers.stl | 398.6KB | |
| ScrewDrivers2.stl | 456.0KB | |
| Small_Pliers2.stl | 287.2KB | |
| snips.stl | 250.4KB | |
| Tape_Holder2.stl | 179.2KB | |
| Tape_Measure.stl | 417.5KB | |
| Tooth_pick_holder.stl | 852.8KB |
