A tool holder for the allen keys and scraper for your Wanhao Duplicator i3. Redesigned from the original version by Chai_Yu_Zheng to not require super-gluing.
Depending on where you want to clip the tool holder, choose the clip-on-left/right/middle files. To mount on the left hand side as shown in the picture, choose clip-on-left. Left/right is correct when looking at the face on which the clip is. The clip-in-middle version should fit in the same hole, but facing forwards, but this is untested.
I've included my gcode files which incorporate a raft and print at 200 Celsius extruder temperature and 70 Celsius bed temperature (this may be a bit high). I can modify these if desired.
| tool_bin-v2-clip-in-middle.gcode | 454.0KB | |
| tool_bin-v2-clip-in-middle.stl | 64.7KB | |
| tool_bin-v2-clip-on-left.gcode | 469.0KB | |
| tool_bin-v2-clip-on-left.stl | 64.6KB | |
| tool_bin-v2-clip-on-right.gcode | 463.4KB | |
| tool_bin-v2-clip-on-right.stl | 64.6KB | |
| tool_bin.scad | 1.3KB |
