The design history of this part can be found in the chapter 'How I Designed This'.

Description

This holder is intended for the tool kit that comes with the Ender-3 V3 SE/KE. it should be clipped to the base of the right gantry leg.

Properties are:

• The design is very compact.
• The holder does not require any mounting material and detaching of printer elements. It clicks around the right leg of the gantry.
• Due to the downward protected placement, the sharp points of the cutting pliers do not pose a risk of injury.
  NOTE: Squeeze the cutting pliers before hanging.
• There is a place for the original Creality steel scraper for bed cleaning etc., which works better than a (self-printed) plastic one. It can be hung by feel without threading, after which it is secured against unintentional sliding out. You can find the scraper at Aliexpress with 3D Printer Stainless Steel Putty Knife (Multi-Function Blade 3D Printer Hot Bed Dedicated Blade Shovel with Plastic Handle).
• Most of the sharp edges of the holder are rounded (no "Tinkercad" and "Sketchup" angularity).

Note: The tool holder has been tested on model KE. Manually check the interference on model SE.

Print Settings:

• Printer brand: Creality
• Printer: Ender-3 V3 SE/KE
• Resolution: 0.2 mm
• Wall thickness: 0.8 mm
• Infill: 15-20%
• Filament material: PLA or even better, the more flexible PETG
• Print the holder upside down. Then no support is needed when the setting of the support overhang angle is ≥45° relative to the print bed.