Tool Caddy - Oval, Two-Color - Remix
This is a remix of...
Cricut pen holder
https://www.thingiverse.com/thing:4966520
Originally posted by rickos on September 16, 2021
I've turned the original model into a tool caddy for the resident paper crafter's work bench. This model has the hollowed out oval modeled as a separate piece with a one-piece set of dividers that fit within it.
The oval is approximately 250 mm X 120 mm. The base will need to be oriented on the diagonal of the print bed to fit on most printers but that works fine.
The top of the base is tapered at 15 degrees, from 75 mm at the back to approximately 50 mm at the front. It has a cut-out at the front with an edge that is 25 mm high. Side wall thickness of the base is 2 mm and the bottom is 3 mm thick.
Both pieces are fairly large prints requiring 30-40 meters of filament and many hours of printing time, depending mainly on the selected shell thicknesses and infill density.
Printing notes:
PLA; 0.4 mm nozzle; 0.8 mm shells, 0.2 mm layer height; 10% infill
| Cricut_Caddy_-_Rack_rev_1.stl | 16.5KB | |
| Cricut_Cady_-_Shell_rev_0.stl | 79.4KB |
![Macrotrack Oval Speedway Miniature [SAMPLE PACK] 3D Printer Model](https://cdn.3axis.co/assets/2b/6e/33/66/2b6e3366-4366-495c-9031-1eb3ba3a8e8c/images/9923d3d4-ab4a-4005-b273-a3f7491bec84_thumb.jpg)
