Tomorrowland Moonliner 3D Printer Model
The file 'Tomorrowland Moonliner 3D Printer Model' is (stl) file type, size is 11.2MB.
The file 'Tomorrowland Moonliner 3D Printer Model' is (stl) file type, size is 11.2MB.
Here is the Tomorrowland TWA Moonliner.
It is 20 inches tall. It has very fine paint and text lines on it so it would be best on a resin printer. On an FDM printer you’ll just need to draw the text and lines by hand.
I also made instructions for it. You can download them on the Daveyland Discord group. Follow the link to the discord group.
I’m hoping to get more people to share their projects there too…and make it a fun group of modelers.
Fixed the discord link
I’m going to keep making more free Disney models for everyone, If you would like to support me please see my Patreon page. It is really appreciated
Patreon.com/daveyland
Thank you
David
| Arm_1.stl | 2.8MB | |
| Arm_2.stl | 2.8MB | |
| Arm_3.stl | 2.8MB | |
| Cockpit_Cabin.stl | 1.3MB | |
| Engine_Fin_1.stl | 316.1KB | |
| Engine_Fin_2.stl | 316.1KB | |
| Engine_Fin_3.stl | 316.1KB | |
| Engine_Fin_4.stl | 316.1KB | |
| Engine_Tube.stl | 107.9KB | |
| Landing_Leg_1.stl | 114.8KB | |
| Landing_Leg_2.stl | 114.8KB | |
| Landing_Leg_3.stl | 114.4KB | |
| Lower_Body.stl | 4.0MB | |
| Mid_Body.stl | 3.8MB | |
| Nose_Cone.stl | 212.0KB | |
| Pin_1.stl | 72.1KB | |
| Pin_2.stl | 75.6KB | |
| Pin_3.stl | 72.1KB | |
| Platform.stl | 725.9KB | |
| Platform_Grate.stl | 109.5KB | |
| Platform_Railing.stl | 2.6MB | |
| Sign_1.stl | 55.8KB | |
| Sign_2.stl | 63.5KB | |
| Sign_3.stl | 55.8KB | |
| Strut_1.stl | 36.7KB | |
| Strut_2.stl | 36.7KB | |
| Strut_3.stl | 36.3KB | |
| Strut_4.stl | 36.4KB | |
| Strut_5.stl | 36.4KB | |
| Strut_6.stl | 36.4KB | |
| Strut_Plate_1.stl | 124.3KB | |
| Strut_Plate_2.stl | 122.0KB | |
| Strut_Plate_3.stl | 122.0KB | |
| Upper_Body.stl | 3.7MB |
