TOLL COTTAGE 3D Printer Model
The file 'TOLL COTTAGE 3D Printer Model' is (stl) file type, size is 926.56 KB.
The file 'TOLL COTTAGE 3D Printer Model' is (stl) file type, size is 926.56 KB.
FOR PERSONAL USE ONLY - Not for profit or gain.
Please read my profile before downloading.
I sincerely hope others will enjoy my designs. I am always pleased to hear about successful or useful prints. Please post a photo of successful ‘makes’ if you can.
TOLL COTTAGE
This is intended to be scenery for a model railway. It could be used as a toll cottage, a gate cottage or maybe a level crossing keeper's cottage.
I have printed the prototype and it prints well. No need for supports or a brim. Please watch the first layer to check it adheres well.
My intention is to texture the conical roof to make it look like thatch and to texture the circular wall to make it appear rendered. The main part of the building and the chimney have a brick appearance, the outhouse should appear as horizontal planks and the remaining roofs should look tike corrugated iron.
As with all my designs, a lot of time and care has been invested and I am very happy to share. However, please don't make these to sell. I did not design the model for others to make profit.
DIMENSIONS (approximate)
Length 103mm
Width 66mm
Height 55mm
Door height 24mm
I really hope this prints well and is useful to someone. If you get a successful print, please publish a photo here. If you have any issues, please politely comment and I will attempt a fix.
| FILE1.stl |
| TollCottage-4.stl |
