Designed for an American Standard Toilet, this vent takes the stink directly from the source and removes it to either an outside area, or a container with charcoal or potpourri, or even a flare if necessary! JK, don't use a flare with "exhaust gasses"
The design for the version with the back airflow fits 1 1/8" bilge tube perfect. designed to be ducted into 1.5" DWV pipe, the fan adapter fits on the pipe. A power outage wiped out the 1 1/8 tube to 1 1/2 adapter i made, but should be easy to create until i upload a new one.
I filled the infill on the left side with silica sand during the print, but it turned out unnecessary.
| 70mm_fan_1.5_PVC_adapter_v1.stl | 235.1KB | |
| Toilet_Vent_back_v4.stl | 402.9KB | |
| Toilet_Vent_bottom_V1_v7.stl | 498.1KB |
