I needed one, so I made one :)
It´s a simple design, but smart: The base is screwed to the wall, one screwhole oval to allow an horizontal fixing. The hanger is fixed to it by a clip and thereby the screws become invisible. The clip has a little opening at one side so you can easly use a screwdriver to bend it open to release the hanger.
The back side is flat, so only a little support is used printing it - but print all parts with support.
I used 3 shells to make it strong - I used 35% infill, but 20% should be enough.
| toilet_base.stl | 63.3KB | |
| toilet_buegel.stl | 271.8KB | |
| toilet_clip.stl | 20.6KB |
![[HSW] Toilette Paper Dispenser 3D Printer Model](https://res.3axis.co/eaf49031-9576-43de-b94a-9a1698dca740/images/6a0acd66-bcfb-4035-a5c3-876711921611_thumb.jpg)
