Toggle Switch Case 3D Printer Model
The file 'Toggle Switch Case 3D Printer Model' is (f3d,stl) file type, size is 571.8KB.
The file 'Toggle Switch Case 3D Printer Model' is (f3d,stl) file type, size is 571.8KB.
This is a case for one or two toggle switches.
The outer shape is based on a generic emergency button.
Upper and lower part are connected with M3 screws, the lower part has brass hot melt inset nuts.
Edit 1 (2021/02/25): The holes are for common switches with a diameter of about 12 mm. If your switch doesn't fit, download the Fusion 360 file and change the diameter. It is really easy. The switches I used are these: https://www.amazon.de/gp/product/B01FHLPOK2
Edit 2 (2021/02/25): And here are the insets I use: https://www.amazon.de/gp/product/B08PV3R86P or https://www.amazon.de/gp/product/B08BCRZZS3.
| Rocker_Switch_Case.f3d | 211.6KB | |
| Rocker_Switch_Case_-_lower_part.stl | 388.7KB | |
| Rocker_Switch_Case_-_upper_part.stl | 288.9KB | |
| Rocker_Switch_Case_Single.f3d | 199.0KB | |
| Rocker_Switch_Case_Single_-_upper_part.stl | 273.9KB |
