An upgrade to the stock transmission, it uses eight mr155-2rs groove bearings (5x11x4mm) to support the gears. 2X 5x71 mm axle for gear support
To fit pinion, you need a 0.6M 9 tooth brass gear to fit the 3d printed gear over. Brass shreds PLA, but pla slips on the axle. So this is what i came up with to fix both problems.
needs 16 m3 bolts and 6 nuts to secure. the transmission, do note that you need to drill the holes in the tank yourself
| beam.stl | 7.9KB | |
| bolting_plate.stl | 62.3KB | |
| hatch_support.stl | 12.2KB | |
| motorL.stl | 70.3KB | |
| motorR.stl | 70.3KB | |
| pinion_gear.stl | 513.6KB | |
| plate_left.stl | 65.2KB | |
| plate_mid.stl | 100.0KB | |
| plate_right.stl | 65.2KB | |
| spur_gear.stl | 1.1MB | |
| transfer_gear.stl | 846.5KB |
