Tofu Carrier Board Case 2 3D Printer Model
The file 'Tofu Carrier Board Case 2 3D Printer Model' is (stl) file type, size is 166.0KB.
The file 'Tofu Carrier Board Case 2 3D Printer Model' is (stl) file type, size is 166.0KB.
This is my second design for my raspberry pi compute module 4 on my tofu carrier board. I've used my first design as a desktop computer but after it fell off my desk and broke I reused the CM4 for a retro gaming station that I mounted next to my projector.
Please be advised that i've mounted my computer to a wardrobe. I've used the base plate of my old design and this new one to secure all the other sides.
You could print my baseplate or just use standoffs.
If you want to print this one you'll need the following things:
Tofu Carrier board
CM4
A 40mm fan (pwm control would be beneficial)
a button (wired to GPIO 4 / 5) for automatic on / off
a switch to turn the fan on / off (if you don't use a switch the fan will run at 100 % if the computer turns off)
Heatset inserts / screws
Tools:
Soldering kit
Hot glue
| Bottom_part_if_needed.stl | 477.3KB | |
| button_cross_glue_on.stl | 2.2KB | |
| Case_für_Console.stl | 115.3KB |
