Tofty’s 28mm Wheeled APC Remix 3D Printer Model
The file 'Tofty’s 28mm Wheeled APC Remix 3D Printer Model' is (STEP,STL) file type, size is 5.3MB.
The file 'Tofty’s 28mm Wheeled APC Remix 3D Printer Model' is (STEP,STL) file type, size is 5.3MB.
I present my wheeled APC remix. It's primarily based on a couple of designs; by Hedron_Manufacturing_Inc and KrisWall. I wanted to use the elements I liked from both, while adding a little more detail as I went.
The photos and renders attached show the original version, which has since been tweaked slightly.
4mm diameter rods will be needed to help line up the body and two sides.
| APC_Assy_02.STEP | 13.2MB | |
| APC_Body_02.STL | 324.4KB | |
| APC_Bolter_02.STL | 696.5KB | |
| APC_Hatch_02.STL | 17.5KB | |
| APC_Rear_Door_01.STL | 21.2KB | |
| APC_Sensor_01.STL | 124.1KB | |
| APC_Side_Left_02.STL | 681.8KB | |
| APC_Side_Right_02.STL | 683.0KB | |
| APC_Wheel_Left_01.STL | 476.4KB | |
| APC_Wheel_Left_02.STL | 468.7KB | |
| APC_Wheel_Left_03.STL | 467.7KB | |
| APC_Wheel_Left_04.STL | 469.6KB | |
| APC_Wheel_Left_05.STL | 465.0KB | |
| APC_Wheel_Right_01.STL | 476.4KB | |
| APC_Wheel_Right_02.STL | 465.2KB | |
| APC_Wheel_Right_03.STL | 468.8KB | |
| APC_Wheel_Right_04.STL | 466.4KB | |
| APC_Wheel_Right_05.STL | 468.2KB |
