Yo fam !
Here the simple VACUUM FORMING BOX 3D printable from A to Z and its working as intended .
I know there're already some VC box but i was looking for something simple, small and easy to use for all the FPV community , mainly for Whoop Pilot and micro .
The idea behind this is to use your trash plastic and recycle it to make your own canopy from let's say Milk Jug , Oil Jug , Laundry bottle and so one anything that is HDPE and PP .
For me Mold you can find some here on thingiverse but if you can't find any let me know on Facebook or here .
Filaments used here is High Temp PC ( Polycarbonate ) and it work perfectly !
Assembly :
1- Top Plate must be glued with SuperGlue on the box and wait at least 48hrs .
2- Plastic Holder ; you need to print these 2; the 1cm and the 5mm and use (4mm screw x 15mm ) x 4
Other things you will need :
1- Shopvac ( walmart and Homedepot has some cheap one )
2- Headgun ( same here )
3- Your HDPE plastic .
MOLD :
https://www.thingiverse.com/thing:3350217 ( Single one )
https://www.thingiverse.com/thing:3032794 ( Good TW canopy Collection )
https://www.thingiverse.com/thing:3816073 (Single one )
| 300.stl | 709.3KB | |
| TKS_VC_Main_BOX.stl | 190.4KB | |
| TKS_VC_Top_BOX.stl | 484.1KB | |
| TKS_VC_TOP_holder_1cm.stl | 36.0KB | |
| TKS_VC_TOP_holder_5mm.stl | 32.1KB |
