This is a mount for the E3D Titan Extruder with V6 Hotend. It is designed to replace the factory extruder.
A few steps are required that include re-compiling the Marlin Firmware to change the y-Min and y-Max, as the Hotend is forward 10mm from the stock location. You MUST load the recompiled firmware or risk damage to your printer.
This upgrade is for experts! I will not be held liable for any damage to your machine. You assume all responsibility to be sure that each step is completed, and I will not be held responsible for missing or improper instructions.
This will void your warranty.
This using instructions from other sites for changing the pinout and assembling the extruder and hotend.
Follow E3D's instructions for assembly of the Titan Extruder.
Follow these instructions for modifying the pinout: http://matterhackers.dozuki.com/Guide/How+to+Install+an+E3D+v6+HotEnd+on+a+Lulzbot+Mini/8
You may wish to upgrade to 1.75mm filament. This is fully compatible and I recommend the upgrade. Simply purchase the 24v 1.75mm hotend instead of the 3mm hotend.
Original design of the Fan Duct is from Lulzbot, modified by me to fit the new extruder, original license from Lulzbot/Aleph Objects applies.
| Extruder2_-_Endstop_Mount.sldprt | 58.0KB | |
| Extruder2_-_Extruder_Mount.sldprt | 137.5KB | |
| Extruder2_Endstop_Mount.stl | 292.2KB | |
| Extruder2_Extruder_Mount.stl | 1.5MB | |
| Extruder2_Fan_Mount.sldprt | 116.0KB | |
| Extruder2_Fan_Mount.stl | 1.3MB |
