Tip out tray for hinged sink door storage.
6/15/15: Added Larger version
Small version is: 7" wide, 2" standout from door, and 2.75" high.
Large version is: 8.75" wide, 2: stand out from door, and 3.25 high.
If you want a tip-out tray and have plastic to burn, these are nice ones. Most tip out sink doors will support two of these side by side. I'm thinking instead of using 4 screws, I'll super glue the joining sides and glue a plastic bar across the bottom, which effectively makes it one piece with a divider in the middle. Plus only need 2 screws this way.
NOTE: I designed this from a solid block, from which material was removed. Also note that the large version still shows holes in the back. I left the pattern but closed the holes so moisture wouldn't get on the mounted surface.
The large tray didn't update, so I made a v2 for no holes in the back. Left the other one just in case someone prefers the holes.
| Large_Tray.STL | 318.9KB | |
| Large_Tray_v2.STL | 354.7KB | |
| sink_drawer_v3.STL | 139.4KB |
