This is a riff on cudbur's duct for the original TinyHawk Freestyle. (https://www.thingiverse.com/thing:4696407)
The Freestyle 2 has a slightly different bolt pattern, so I made my own model. Uses existing screws for the bottom plate and completely replaces the top plate.
The camera fits in directly with compression from the ducts themselves, no gluing or modification.
Like cudbur said in their post, don't do this if you use your Freestyle 2 for freestyle flying. This will largely turn your drone into a cinewhoop. I also did not spend many iterations as cudbur did. This was a one-and-done type design.
**Use at your own risk. I do not take responsibility for broken props, motors, ESCs, etc.
| thf2_duct.stl | 2.7MB |
