TinyEye - a Tiny Whoop Pinch camera mount.
Main features:
-Lightweight: <0.3g if printed from PP filament)
-Secure fit: Pinch camera by the notched ring + crossbeam to hold the PCB
-Rigid: Ribs and thickness optimized by FEA
Camera angles included are 45, 42.5, 40, 37.5, and 35 deg. If there is interest in some other angle, let me know and I'll considered adding them as well.
===UPDATE===
All the camera angles used to make the ultralight PP mount on tinywhoop.com have been uploaded now. Enjoy!
For those having trouble with printing the upper portion of the loop / camera holder - Note, that for printing I used OrcaSlicer with drawn on "snug" supports for just the middle ~5mm of the loop. I found this improved the print reliability and was still easy to hand remove the supports afterwards without too much trouble.
| TinyEye_Mount_v6___35deg.stl | 1.7MB | |
| TinyEye_Mount_v6___37p5deg.stl | 1.5MB | |
| TinyEye_Mount_v6___40deg.stl | 2.0MB | |
| TinyEye_Mount_v6___42p5deg.stl | 1.9MB | |
| TinyEye_Mount_v6___45deg.stl | 2.0MB | |
| TinyEye_Mount_v9___0deg.stl | 1.9MB | |
| TinyEye_Mount_v9___110deg.stl | 1.9MB | |
| TinyEye_Mount_v9___15deg.stl | 2.3MB | |
| TinyEye_Mount_v9___20deg.stl | 2.2MB | |
| TinyEye_Mount_v9___22p5deg.stl | 2.2MB | |
| TinyEye_Mount_v9___25deg.stl | 2.2MB | |
| TinyEye_Mount_v9___27p5deg.stl | 2.2MB | |
| TinyEye_Mount_v9___30deg.stl | 2.2MB | |
| TinyEye_Mount_v9___32p5deg.stl | 2.2MB | |
| TinyEye_Mount_v9___35deg.stl | 2.2MB | |
| TinyEye_Mount_v9___37p5deg.stl | 2.2MB | |
| TinyEye_Mount_v9___40deg.stl | 2.2MB | |
| TinyEye_Mount_v9___42p5deg.stl | 2.2MB | |
| TinyEye_Mount_v9___45deg.stl | 2.2MB | |
| TinyEye_Mount_v9___47p5deg.stl | 2.2MB | |
| TinyEye_Mount_v9___50deg.stl | 2.2MB | |
| TinyEye_Mount_v9___55deg.stl | 2.3MB | |
| TinyEye_Mount_v9___60deg.stl | 2.4MB | |
| TinyEye_Mount_v9___65deg.stl | 2.5MB | |
| TinyEye_Mount_v9___90deg.stl | 2.6MB |
