The file 'Tiny3DMaker 3D Printer Model' is (stl,STL,dxf,zip,rsdoc,xlsx) file type, size is 53.0MB.
I wanted a small printer that was easier to carry with me, when i go somewhere i might need to print something. Here is a video of it printing https://youtu.be/C41nArldG2I
print area is 100x100x100 mm
i knew it was gona have an china copy of the e3d v6 hotend so i started to design it out from that. i had some 4 mm acrylic already so i designed it to be lasercut from that.
there will not be any instructions on how to assemble it, but there is a file for the program Designspark Mechanical where it was made, you ca use to see how it was put together.
there is also be a parts list that is mostly complete. i have also included the firmware i made for it.
total cost for the parts on the printer is about 1000 DKK (164 USD, 135 EUR)
you will need acces to a laser cutter and a 3dprinter to build this.
If you make it plzz be sure to add the 3dprintet part on the front with Tiny3DMaker in any color you like, and make a make on this thing.
This is released as non-Commercial plzz respect that, if you want to make and sell it contact me directly.
| 3x_Filament_tube_holder.stl | 264.9KB | |
| 3x_Wire_holder.stl | 264.9KB | |
| Black_Tiny.stl | 16.1KB | |
| Blue_3D.stl | 34.5KB | |
| display_encoderbutton.stl | 148.0KB | |
| display_module.stl | 724.7KB | |
| e3dmount_base.stl | 6.9MB | |
| e3dmount_lock.stl | 6.5MB | |
| e3dv6_piggyback_fan_duct.STL | 1.1MB | |
| e3dv6_piggyback_fan_duct_mirrored.stl | 1.1MB | |
| feet.stl | 1.3MB | |
| laser_7x_rod_blokker.dxf | 57.9KB | |
| laser_back.dxf | 152.6KB | |
| laser_bottom.dxf | 218.1KB | |
| laser_front.dxf | 225.0KB | |
| laser_left.dxf | 124.0KB | |
| laser_right.dxf | 196.5KB | |
| laser_text_allig_tool.dxf | 130.5KB | |
| laser_top.dxf | 109.9KB | |
| Marlin-1.1.x.zip | 1.8MB | |
| nema17spacer_x_axis.stl | 511.3KB | |
| nema17spacer_y_axis.stl | 493.8KB | |
| Orange_Maker.stl | 50.7KB | |
| ramps_holder_part_1.stl | 5.8MB | |
| ramps_holder_part_2.stl | 10.6MB | |
| Spool_holder.stl | 54.1KB | |
| Tiny3DMaker.rsdoc | 103.9MB | |
| Tiny3DMaker_BOM.xlsx | 15.9KB | |
| x_carriage.stl | 1.1MB | |
| Y_carriage.stl | 1.4MB | |
| zknop.stl | 12.7MB | |
| Z_carriage_left.stl | 837.3KB | |
| Z_carriage_right.stl | 1.0MB |
