TINY TESTER
It is designed to test printing quality properties in the smallest space possible.
! ONLY USE SUPPORTS AS SHOWN !
TESTS INCLUDED
Stringing
Clearance
Carved Texts
Bridging
Curvature Layers
Overhang Gaps
Overhang Angles
External Supports
Internal Supports
Angled Supports
Scaling
Layer Quality
Adhesion
HOW TO USE
1) Align the model as the Y axis labeled at the bottom of the part.
2) Add support structure to only the "letter D" shaped overhang.
3) Start to print and observe. If anything goes wrong, stop the print asap.
4) Clear the support and separate the "screw-shaped pins" by breaking their tips.
5) Examine each side of the part and perform the clearance test by inserting the separated "screw-shaped pins" into the vertical and horizontal holes.
| Tiny_Tester.STL | 33.7MB |
