I roughly remixed this Design (just basic shape though):
https://cults3d.com/en/3d-model/tool/10-switch-ears-tl-sg108
Can be printed in 3 parts without support. The Top and Bottom must be adhered together with superglue. Then Pressfit M3 Threads are inserted and the Front screwed to the Base.
Comment and post Makes please.
| NeatPatchBottom.stl | 102.4KB | |
| NeatPatchBottomWithTensionStrips.stl | 189.7KB | |
| NeatPatchFront.stl | 72.3KB | |
| NeatPatchTop.stl | 6.5KB | |
| TinyPatch.stl | 269.4KB |
