Tiny Mini Wall Fountain Water Well Full Functional 3D Printer Model
The file 'Tiny Mini Wall Fountain Water Well Full Functional 3D Printer Model' is (stl) file type, size is 759.4KB.
The file 'Tiny Mini Wall Fountain Water Well Full Functional 3D Printer Model' is (stl) file type, size is 759.4KB.
This mini wall fountain/ sink I made, cause I try to create the smallest functional watering item.
It is printed in UV Resin on an Anycubic Photon SE.
Paint the ready printed item as you like. --I just hurried in coloring as you see, cause I focused the function.
The pump is available in all online dealers. It´s a cheap 5V USB pump. You have to modify the water outlet to fit into the compartment. Also a silicone hose 4.5mm diameter is needed. Assemble the hose on the outlet upwards by glue or UV-resin.
Please check out my other mini fountain project
Let me know, if you created a smaller fountain in function :-)
The current model can be upscaled in different sizes to fit different modelling scales. My sample is 6.8mm height.
NEW: I attached pics of the assembled hose on the pump and the modification on the flange.
Cut off the flange and drill a hole in diameter of the hose in the flange. Fix it with UV resin or hot glue.
Use the "Ver2" to print, there I´ve done some bugfixes an da nicer shaped sink and top.
Enjoy the model in your diorama and decorations.
| Mini_Wall_Well.stl | 896.0KB | |
| Mini_Wall_Well_V2.stl | 977.5KB | |
| Mini_Well_lid.stl | 13.9KB |
