Tiny Edge – Micro Scale Edge 540 RC Plane 3D Printer Model
The file 'Tiny Edge – Micro Scale Edge 540 RC Plane 3D Printer Model' is (stl) file type, size is 15.3MB.
The file 'Tiny Edge – Micro Scale Edge 540 RC Plane 3D Printer Model' is (stl) file type, size is 15.3MB.
A tiny Edge 540 semi scale model. Wingspan 400 mm.
Unfinished and untested at the moment but improvements will keep coming. With some handywork it should be possible to create a complete model with the current files already. You'll have to find a way to add servo's and a motor yourself. Some small parts like the landing gear require a little post processing (sanding/filing) to make them fit nicely and a few holes need to be cut open.
Warning, to print this you need to be comfortable with vase/shell mode settings. It's recommended to use foaming PLA, or any other lightweight filament that you prefer. I've designed it a bit optimistic with a 0° AoA and symmetric airfoil. Complete airframe comes in at around 29 grams printed in Colorfabb LW-PLA with most parts printed at 45% flow.
Feedback is appreciated because it helps me make improvements. If you succeed at building this model, please share your makes! :-)
Recent changes:
| Tiny_Edge_Aileron_-_clean.stl | 58.9KB | |
| Tiny_Edge_Aileron_with_horn_-_Part_A.stl | 103.7KB | |
| Tiny_Edge_Aileron_with_horn_-_Part_B.stl | 92.5KB | |
| Tiny_Edge_Canopy.stl | 2.1MB | |
| Tiny_Edge_Elevator_-_foam.stl | 172.7KB | |
| Tiny_Edge_Foam_cutting_templates.stl | 28.2KB | |
| Tiny_Edge_Fuselage_front.stl | 5.0MB | |
| Tiny_Edge_Fuselage_Tail.stl | 1.5MB | |
| Tiny_Edge_Horizontal_stabilizer_-_foam.stl | 319.4KB | |
| Tiny_Edge_Landing_gear_legs.stl | 2.4MB | |
| Tiny_Edge_Motor_mount_6mm_5deg_-1.5deg.stl | 4.1MB | |
| Tiny_Edge_Nose_cowl_with_supports.stl | 6.2MB | |
| Tiny_Edge_Rudder_-_foam.stl | 18.4KB | |
| Tiny_Edge_Servo_and_battery_tray.stl | 314.8KB | |
| Tiny_Edge_Servo_horn.stl | 72.4KB | |
| Tiny_Edge_Spinner.stl | 958.8KB | |
| Tiny_Edge_Tail_wheel.stl | 1.2MB | |
| Tiny_Edge_Vertical_stab_-_foam.stl | 201.2KB | |
| Tiny_Edge_Wheel.stl | 1.3MB | |
| Tiny_Edge_Wheel_pant_with_support.stl | 2.8MB | |
| Tiny_Edge_Wing.stl | 673.8KB | |
| Tiny_Edge_Wing_-_clean.stl | 28.4KB | |
| Tiny_Edge_Wing_tip.stl | 1.1MB |
