About

Tiny and quick to print Christmas tree. Height: 5 cm, 2 parts. All elements are very easy to print even for begginers (do not require the use of supports).

To check more projects see: https://www.printed-toys.com

If you would like to support me:

• just buy something in my shop https://www.printed-toys.com (You pay what you want!)
• share or like my profile on Facebook: https://www.facebook.com/printedToys
• share or like my profile on X/Twitter: https://twitter.com/Printed_Toys

Thank You!

Important note

All christmas tree files are located in a zip archive (christmas-tree.zip). For illustration purposes there is a christmas-tree.stl file outside the zip archive, but it is also included in the archive. Once downloaded, unzip the entire folder and read the information it contains.

Printing

• We recommend using PLA filaments, 0.4 mm nozzle and 0.2 mm layer height, but you can test other settings as well.
• All elements are placed in print-ready positions, you don't need to rotate them in your slicer.
• Elements are easy to print and do not require the use of supports, brims or rafts.
• Print all elements with 100% fill, but if you like you can try other settings.

Assembly

Insert the stand into the Christmas tree and rotate it 90 degrees clockwise. The stand will snap into this position and will not fall out.