Timemore Sculptor E61 Portafilter Holder 3D Printer Model Free Download

Description Files (8)

Summary

E61 (58 mm) style portafilter holder for Timemore Sculptor coffee grinders. Should work across both 064 and 078 series. Magnetises to the base like the original catch cup to align nicely with the grinder chute.

Tested with the Decent portafilter, but should work with any E61 style portafilter as the lugs are usually similar.

Versions:

10x3 mm or 12x3 mm magnets
1 or 2x magnets - for more satisfying magnetism
Shorter and taller (+5 mm) height - to suit different funnel lengths

Parts needed:

1-2x magnets
(Optional) Super glue

Printing instructions:

Resolution: any
Infill: 15% is enough
Supports: no

Assembly instructions:

Test the magnet polarity against the grinder to ensure they attract to the base
Press fit or super glue the magnet into the underside of the print. If you made a mistake with the polarity, use a thin flat screwdriver to pry out the magnet via the groove leading into the magnet hole

Timemore_Sculptor_E61_portafilter_holder_1x_10_mm_magnet_short.stl	288.3KB
Timemore_Sculptor_E61_portafilter_holder_1x_10_mm_magnet_tall.stl	305.5KB
Timemore_Sculptor_E61_portafilter_holder_1x_12_mm_magnet_short.stl	289.3KB
Timemore_Sculptor_E61_portafilter_holder_1x_12_mm_magnet_tall.stl	306.4KB
Timemore_Sculptor_E61_portafilter_holder_2x_10_mm_magnets_short.stl	299.1KB
Timemore_Sculptor_E61_portafilter_holder_2x_10_mm_magnets_tall.stl	316.2KB
Timemore_Sculptor_E61_portafilter_holder_2x_12_mm_magnets_short.stl	301.3KB
Timemore_Sculptor_E61_portafilter_holder_2x_12_mm_magnets_tall.stl	318.1KB

Timemore Sculptor E61 Portafilter Holder 3D Printer Model

Summary

Tags

You might also like