Timelapse Dolly 3D Printer Model
The file 'Timelapse Dolly 3D Printer Model' is (stl) file type, size is 406.1KB.
The file 'Timelapse Dolly 3D Printer Model' is (stl) file type, size is 406.1KB.
A timelapse dolly rig I constructed from an aluminum sliding rail I acquired long ago. The rail came with an aluminum sled, but I removed the slider bearings and affixed them to a 3D printed sled instead. I designed a belt tensioner using regular 6mm timing belts and components. The belt tensioner just uses a random spring from a shampoo bottle dispenser along with M3 bolts / nuts
The brains of the timelapse dolly is an Arduino Uno with a DollyShield from http://shieldlist.org/dynamicperception/dolly
Printable buttons can be done in TPU or PLA.
The motor is a no-named ~1RPM planetary gear setup I purchased for a robotics project in college.
| Belt_Clamp.stl | 30.9KB | |
| Belt_Clamp_Slide_Lock_Thinnest.stl | 133.2KB | |
| Belt_Spacer.stl | 48.4KB | |
| Belt_Spacer_Link.stl | 30.4KB | |
| buttons2.stl | 61.0KB | |
| Enclosure_Body2.stl | 269.2KB | |
| Enclosure_Lid2.stl | 52.6KB | |
| endstop.stl | 58.7KB | |
| Motor_Mount_Slide.stl | 140.6KB | |
| Sled.stl | 114.9KB | |
| Tensioner_Body.stl | 280.2KB | |
| Tensioner_Knob.stl | 338.8KB | |
| Tensioner_Slider.stl | 66.7KB |
