Tiltrotor RC Aircraft VTOL Nemo V5 3D Printer Model Free Download

Description Files (42)

Summary

Prototyp Tiltrotor RC Aircraft 3D printed Nemo V5

I am starting to share my Tiltrotor RC aircraft Nemo V5. I will gradually give you all the information I think is necessary for its realization. I ask you to have a little patience for the creation of the documentation. Good luck with building your Nemo.

Here are some important features of this design

It is important to keep the weight as low as possible to obtain good flying qualities. This is the reason why I have used LW-PLA filament for many parts.
I printed my Nemo with Simplify 3D. The 3 main fuselage parts use a multi-configuration slicer. I will give other information shortly.
The parts of the fuselage are assembled by screwing. This is to facilitate future updates and possible repairs.

Technical caracteristics :

Wingspan : 1205mm
Lenght : 1007mm
Height : 328mm
Weight : 1.5kg
Profil : NACA 2412

On- board equipment :

Engine : 2x Turnigy Brushless D2628-11 1100KV
ESC : 2x Castle Creation Talon 35
Propeller : GWS tripale modified 8″x5″ (CW et CCW)
Accu Lipo GensAce 14.8V 4S 2200mAh
Servos
- 2x ailerons turnigy
- 2x tilt Hitec HS-225 BB
- 1x elevator Hitec HS-55
Board : KK2.1 with firmware OpenAero VTOL 1.6
Receiver : Frsky X8R (use the S-BUS output to control the KK2.1 card)

Link rcgroups : https://www.rcgroups.com/forums/showthread.php?2773733-Nemo-An-Osprey-Like-Bi-Copter-Test-Bed

Aileron_1A_L_V1.STL	510.7KB
Aileron_2A_L_V1.STL	806.5KB
Battery_holder_V1.STL	38.6KB
Cab_1A_V1.STL	730.0KB
Cab_1B_V2.STL	1.2MB
Elevator_horn_L_V2.STL	558.1KB
Elevator_horn_R_V2.STL	562.2KB
Elev_servo_plate_V1.STL	332.6KB
FrSky_R8XR_receiver_holder_V1.STL	223.1KB
Fus_1A_V2.STL	6.8MB
Fus_2A_V2.STL	5.4MB
Fus_2B_V2.STL	119.2KB
Fus_2C_V1.STL	72.0KB
Fus_2D_V2.STL	352.1KB
Fus_3A_V2.STL	10.6MB
Fus_4A_L+R_V2.DXF	66.7KB
Fus_4A_L_V2_DEPRON.STL	72.9KB
Fus_4A_R_V2_DEPRON.STL	72.9KB
Fus_4B_V2.STL	105.6KB
Fus_4C_L_V2.STL	154.1KB
Fus_4C_R_V2.STL	154.1KB
Fus_4D_V2.STL	1.4MB
KK2_Contr_board_holder_V1.STL	318.9KB
LGear_1A_V1.STL	2.9MB
LGear_1B_V1.STL	1.3MB
LGear_2A_V1.STL	2.3MB
LGear_2B_V1.STL	1.2MB
LGear_4A_L_V1.STL	571.0KB
LGear_4A_R_V1.STL	567.4KB
Rudder_1A_V1.DXF	54.4KB
Socket_stab_V1.STL	175.7KB
Stab_1A_DN_V1_DEPRON.STL	188.0KB
Stab_1A_UP_V1_DEPRON.STL	179.8KB
Stab_1A_V1.DXF	59.7KB
Tilt_3A_L_V1.STL	738.8KB
Tilt_4A_V1.STL	518.4KB
Tilt_5A_L_V1.STL	515.3KB
Tilt_6A_V1.STL	88.0KB
Wing_1A_L_V1.STL	685.7KB
Wing_1B_L_V1.STL	147.8KB
Wing_2A_L_V1.STL	359.4KB
Wing_3A_L_V1.STL	310.8KB

Tiltrotor RC Aircraft VTOL Nemo V5 3D Printer Model

Summary

Tags

You might also like