TILT 3DP Racer Parts – Rev.4 3D Printer Model

License: CC BY-NC
File formats: STL
Download type: zip
Size:1.5MB

The file 'TILT 3DP Racer Parts – Rev.4 3D Printer Model' is (STL) file type, size is 1.5MB.

Summary

Official page: http://www.tiltdrone.com

=======================================

19th October 2015 (Rev.4):

  • new servo base and servo bearing housing for Emax ES09XX servos (alignment fixed)
  • arms supports to use with 25 mm long stand-offs added
  • arms supports to use with 20 mm long stand-offs (rev.3) re-named
  • tweaked gear supports (right and left versions)
  • Tougher motor mounts design
  • Overall assembly rev.4

20th September 2015 (Rev.3):

3rd August 2015 (Rev.2):

I just revised all parts and corrected/improved a few. If you already printed the models previous to this rev.2 'thing', you need to re-print:

  • Gear support L and R
  • Antenna support
  • Servo support for Emax ES09XX
  • Gap filler (new part)
  • Front tip action cam (new part)
  • Servo and arm pulleys (optional: we can't guarantee it prints well since the design is for CNC but some asked for it so, here it is!)

I also added the following models to help you figure out where things go:

  • TILT 3DP NO action cam
  • TILT 3DP for action cam

Nevertheless, all parts have been fixed or improved in some way so the best is you print all the parts again.

=======================================

Get your hands on these files and 3D print the whole frame of a dynamic tilting arms miniquad racer! https://www.tiltdrone.com

To make it fly you will still need non-3D printed parts like tilt servo, arms (can be 3D printed!), pulley (can be 3D printed!), etc. If you want to get those parts visit or for those not familiar with the rest of parts selection (motors, ESCs, etc...) https://tilt-drone.myshopify.com/collections/all

Looking forward here to see what you guys do with our files... post in our Facebook pages (see below), here or email us please!

We do run the open source firmware Cleanflight on the Naze32 flight controller (https://chrome.google.com/webstore/detail/tiltflight-configurator/omcpjdnlgjocjccljjfgoehnnnimpjeo?hl=en) or you program your own flight controller to run the tilt servo ;)

Oh, and plenty of manuals can be found in https://www.facebook.com/groups/DynamicTiltingArmsUsers/files/

Official Facebook page of TILT: https://www.facebook.com/pages/TILT-drone-racer/377017535825189

We use carbon fiber blend filament in most parts (especially structural ones) and PLA in the rest. Of course you can print in any material you wish and we'll be glad if you let us know what have you used and how it works. Send us your pictures and comments at [email protected]

More info at https://www.tiltdrone.com

Note the CC license is 'Attribution - Non-commercial'. If you want to use these files, modifications, derivatives or remixes for commercial use, please contact us.

antenna_support_v6.1.STL 77.9KB
Arms_pulley_20_Sept_2015.STL 341.5KB
arms_support_3DP_v6_LEFT_for_20mm_stand-offs.STL 63.7KB
arms_support_3DP_v6_LEFT_for_25mm_stand-offs.STL 63.7KB
arms_support_3DP_v6_RIGHT_for_20mm_stand-offs.STL 63.7KB
arms_support_3DP_v6_RIGHT_for_25mm_stand-offs.STL 63.7KB
arm_connec_v3.2_POLY_round_-_4_units.STL 107.3KB
base_plate_3DP_v3.6_Sept_2015.STL 588.1KB
battery_base_for_3DP_Sept_2015.STL 128.0KB
front_tip_action_cam_v3.6_-_1_unit.STL 124.5KB
gear_support_v5.4_LEFT.STL 227.2KB
gear_support_v5.4_RIGHT.STL 216.0KB
Mobius_support_v5.3_3DP_Sept_2015.STL 168.4KB
motor_mount_v5.5.STL 173.7KB
PDB_subsitution_for_3DP_Sept_2015.STL 427.6KB
servo_base_v.5.4_for_3DP_frame.STL 111.0KB
servo_IGUS_housing_v6_for_EMAX_ES09XX.STL 33.2KB
Servo_pulley_20_Sept_2015.STL 350.5KB
TILT_3DP_v6_-_October_2015.STL 2.9MB
top_plate_3DP_v.4.1_Sept_2015.STL 465.8KB